Pressure Washing Services

Advantages of Pressure Washing

Summerville Pressure Washing Pros is a great way to rid your home or business of mildew, mold, moss, and other debris that can cause damage. It can also be used to prepare surfaces before painting. Cover any surrounding greenery before beginning a pressure washing project and shut off power outlets if necessary. Also, be sure to use the proper nozzle for your surface.

Pressure Washing ServicesPressure washing is a great way to remove dust, dirt, grime, moss and other materials from various outdoor surfaces. This includes decking, siding, windows, driveways, and patios. It’s important to use the right pressure and the proper nozzle for your surface type to avoid damage. Inexperienced users can accidentally cause scratches, chips, or permanent surface damage. Professional handymen have the experience and knowledge to select the best pressure settings for each surface.

They also know how to spot potential problems and prevent them from getting worse. This saves you time and money in the long run. In addition, a thorough cleaning can make your home and business look new again. Whether you’re planning to paint, stain or seal your exterior, a clean surface is essential for the best results.

Pressure washing can be hard on the environment because it uses a lot of water and can contain soaps and other chemicals that aren’t good for soil or the sewer system. But a professional handyman will use techniques that minimize the environmental impact. This will protect soil, plants and wild animals that come into contact with wash run-off. It will also prevent toxins from leaching into the groundwater that people and pets drink. And it will keep the pressure washer from damaging surfaces that could lead to leaks or other structural issues in the future.

Preparing for Painting

A power washer blasts dirt, mildew and moss off the exterior of your home and gets into tight spaces that a sponge or garden hose cannot. Performing this task before painting ensures that all areas will be cleaned and free of debris, which will result in a higher quality paint job. Additionally, it will help the new paint adhere to clean surfaces rather than a dirty one.

Aside from cleaning off the surface of your house, pressure washing also blows off loose and flaking paint. This makes it easier for you or a professional painting contractor to scrape off and prep the area for paint.

Whether you are planning on selling your home in the near future or just want to give it a facelift, a fresh coat of paint can significantly boost your home’s value. However, if your paint is chipping, peeling and dull, potential buyers may think the rest of the property is in disrepair. Prevent this from happening by having your house professionally pressure washed before you start a painting project.

While pressure washing is a great way to remove grime, it’s important that you hire a reputable and experienced handyman to do the job. If used incorrectly, the high water pressure can damage portions of your house’s exterior such as sheathing or wall cavities. Additionally, the soap and chemicals used in pressure washing can run off into the environment, contaminating soil and damaging plants.

Before hiring someone to pressure wash, take precautions like covering or removing light fixtures, air conditioning units and outlets. Also, be sure to have a tarp nearby in case the water splashes onto any items or areas you do not want washed off.

Preventing Damage

One of the best things about pressure washing is that it is a great way to prevent certain kinds of damage to your home or business. Dirt, moss and grime can eat away at surfaces and cause corrosion. This can lead to cracking, warping and other problems with your building or its outdoor items. Pressure washing removes this corrosive material, ensuring that your property is safe and looking its best.

Even with the proper care, it is possible to accidentally damage items when using a pressure washer. For example, if you are cleaning wood with a high setting, you can splinter the surface and create a safety hazard for anyone who walks over it afterwards. It is also possible to blast paint off of objects, especially if they are very old and have been exposed to the elements for a long time. This can chip away the paint, leaving bare wood or even holes in the wall. It is important to always use a low setting when cleaning painted surfaces and to ensure that you are using the right kind of cleaner.

It is also important to take measures to protect your plants, cars and other items from the pressure washer’s stream of water. You can do this by covering them, or by rinsing them off with water before and after you finish. This will help to reduce the amount of soap and other chemicals that are rinsed off into the soil and into the sewer.

Another thing to consider is that most pressure washer cleaning solutions are abrasive or corrosive. Simple Green’s Oxy Solve products, however, are Safer Choice certified and have been specifically designed to be used with pressure washers without damaging the environment or the surfaces they clean. This makes them a safer and more effective alternative to traditional cleaning products for both your landscaping and your equipment.

Preventing Allergies

Regular pressure washing helps prevent the build-up of airborne allergens such as dust, dirt and pollen. These irritants are known to trigger itchy eyes, runny nose and congestion in allergy sufferers. Pollen can be especially problematic for those with allergies as it tends to stick to surfaces and can accumulate over time. If left unattended, pollen can also stain surfaces such as siding and decks. Fortunately, it is easy to get rid of this allergy-causing debris with a simple cleaning from a professional pressure washer using a soft power setting.

In addition to removing stubborn dirt, pollen, and grime, regularly scheduled residential and commercial pressure washing can also remove the formation of harmful substances like mold and mildew that can cause respiratory issues in allergy sufferers. In fact, microbial growth is much more dangerous than pollen as it can penetrate the skin and enter the lungs, which can lead to severe health problems.

Pressure washing is one of the best ways to keep your home healthy and safe. The team at Blue Wave is well-versed in the proper methods of pressure washing, ensuring your property will not only look its best but will be protected from damage during the cleaning process. Contact us today to schedule a professional pressure wash for your home or business. We proudly serve customers throughout the Greater Boston area including Cambridge, Somerville, and Waltham. We look forward to helping you protect your home or business and improve its curb appeal! Call us or fill out our online form to request a free estimate. We also offer roof and gutter cleaning services. We are licensed and insured. We use only the best professional equipment and quality chemicals for all our jobs.

Increasing Your Home’s Value

When it comes to selling a home, boosting the curb appeal is crucial. If the exterior of your house has years of caked on dirt, mildew, moss or algae, potential buyers may move on to another home. A thorough pressure wash can increase your chances of selling and may even save you money on future paint and roof repairs.

When people look at your property, they usually don’t see the dirt, mud, debris and other blemishes that are stuck in the cracks of siding or in the crevices of brick and stonework. A good pressure washing job can make these areas look brand new.

In addition to making your home and driveway look better, power washing can also reduce the amount of bacteria that is growing on your property. These bacteria are a breeding ground for harmful mold and can cause several diseases when they come into contact with you or your family. A power wash by a professional can keep these bacteria from spreading and keeping you healthy.

It takes a lot of time and effort to clean your property yourself. But hiring a professional power washing service to take care of all of the dirty work is well worth it in terms of increasing your home’s value and making your life easier. Whether you’re preparing to sell your home or just want to get it ready for spring, consider hiring a professional power washer to handle all of your cleaning needs. You’ll be glad you did!

 

Sump Pump

How a Sump Pump Prevents Basement Flooding

Keep your basement free of flooding by funneling excess groundwater into a sump pump pit. Once the pit is full, a float switch turns the pump on to remove the water through a discharge pipe.Sump Pump

If your sump pump is making loud rattling noises or running constantly, check to see if the float switch has become stuck or if debris is blocking it. Also, inspect the check valve and discharge line.

A sump pump is a good idea to prevent your home from flooding when heavy rainstorms, strong winds, and rapid melting snow threaten to flood your basement. It works by collecting groundwater in a basin or pit and then pumping it away through a pipe that runs several feet to a drainage point on the outside of your house. This water is then sent back into the earth through storm sewers or percolation, leaving your home dry.

The pump is activated by a float switch that monitors the water level in the sump pit. When the float rises, it signals the pump to turn on and start draining the water. The pump must be properly sized to ensure that the water is removed quickly and without overloading the motor. The float should be checked frequently to make sure it isn’t stuck. The discharge pipe should also be checked to be free of blockages. In addition, the area around the pit should be clear to prevent debris from collecting inside or near the pump.

Once the float switch triggers the pump, a centrifugal motor pumps water into a discharge pipe. This forces the rising water to the sides of the pipe, creating a low pressure area in the center. This allows the suction power of the pump to draw water up through the pump’s pipe and out of the pit. The float switch is then repositioned to start a new cycle.

Backup battery power supplies allow the sump pump to continue working even when the electricity goes out. These are commonly used in areas that experience frequent outages. They are available for purchase or rent and are very convenient. The backup batteries should be tested periodically for proper operation. The battery charger should be located 3 to 4 feet above the floor of the basement and stored in a plastic battery box for protection from water.

The battery should be a combination lead-acid battery that has a CCA and an AH rating. It should be placed on a dedicated battery charger to keep the voltage above 12 volts.

Design

The sump pump is a special pump inserted into a basin installed in the floor that collects groundwater and pumps it out of the basement or crawl space, preventing potential flooding. Often, wet basements aren’t caused by the sump pump itself; they occur when water that falls on the ground isn’t able to drain or moves away from the home. A well-designed drainage system can prevent this and keep the basement dry, but if you want to go further than simply directing water out with gutters or grading the land around your home, a sump pump is an excellent solution.

A good sump pump design can prevent basement floods and even stop them before they begin. This is especially important during winter when ground-water rises and water accumulates in the basement from thawing snow.

It’s also important to install the sump pump correctly to ensure its longevity and performance. For example, the sump pit should be located at the lowest point of the basement and close to a ground fault circuit interrupter (GFCI) outlet. The pit should also be large enough to accommodate the pump and any discharge line that will be connected to it.

In addition, the sump pump should be sized to handle the maximum flow that it will experience at peak demand. This will be based on physically fitting the pump and components within the sump basin as well as the volume of storage in the basin. Generally, two 4″ pumps sized to accept 80 gpm at peak inlet flow can fit into a 5′ diameter basin with 147 gallons of storage per foot of depth.

A float switch, or float activator arm, is another vital component of a good sump pump design. This is the device that will alert the pump to turn on when the basin reaches a certain level of water. It works similarly to the float in a toilet tank, but can be made out of materials that won’t clog or get hung up on debris in the sump basin.

A faulty float switch will cause the pump to cycle continuously, which can burn out the motor long before its designed lifespan. A loud rattling noise when the sump pump is in use may indicate that this has happened, so it’s important to inspect the float and pump regularly for issues.

Installation

A sump pump is one of the best home improvement projects you can undertake to prevent basement flooding. It helps protect your home from both short-term and long-term damage caused by heavy rainstorms, rapidly melting snow, or water seepage. A well-designed sump pump channels away the water and carries it outdoors, where it is safely discarded far from the foundation of your home.

A good place to locate your sump pit is a spot where the water will naturally flow down and away from your home, such as near a drainage ditch or river. You may want to consult your local building code for guidelines on where you can route the pump discharge. Most towns don’t allow you to run a sump pump’s discharge line directly into a sewer, so it is best to install a dry well or other drainage solution outside of your house.

Dig a hole for your sump pit that is at least 22 inches deep. Before putting the basin in, line it with coarse gravel to promote proper drainage and keep silt from clogging the pump. Once the sump pump is in, put more gravel around it, then a stone paver on top to raise it from the bottom of the pit. Use a check valve on the pump outlet to ensure that water flows out of the sump pit and not back into your basement. Install the valve using a hose clamp so you can remove it for servicing or replacement.

You should also consider adding a battery backup sump pump, which will give you an extra layer of protection if your power fails during a storm. This upgrade is especially important in areas prone to flooding from floods or river rises.

You can buy a complete battery backup sump system from GEM, including the Zoeller 1/3 HP M53 sump pump and a Zoeller 1/2 HP M98 upgraded sump pump. The installation process for both pumps is very similar, but be sure to follow the instructions that came with your kit carefully. It is also important to test the pumps regularly for clogs and other problems.

Maintenance

Sump pumps are hard-working pieces of equipment that keep moisture out of basements and other areas of the home. They require maintenance and inspections to ensure they can continue to function well.

A sump pump works by collecting water in a pit and then pumping the water out of the pit and away from the foundation when the water level rises. The sump pump can also be connected to a battery-powered backup that will activate in the event of a power outage.

While your sump pump should operate automatically, it needs to be checked regularly to make sure the float switch is functioning properly and the discharge pipe is directing water away from the house. A sump pump that continuously runs or takes too long to empty the pit can put a strain on its motor and lead to a breakdown.

In addition, a professional inspector will check the sump pump pit to ensure it’s large enough and free of obstructions. He or she will also inspect the float switch and a backup power source to ensure they are in good working condition. The professional will also ensure the pump has an alarm and that the discharge pipe is directing water far enough away from the home but not into a public sewer system or septic tank.

The inspection will also look at the power cord and ensure it is connected to a ground fault circuit interrupter (GFCI) outlet. This outlet prevents an electric shock from occurring when the sump pump is running. Finally, the technician will inspect the discharge pipe and ensure it is draining properly and is directing the water at least 20 feet away from the home.

When you perform your own sump pump maintenance, be sure to turn off the power supply to the pump and remove it from the pit. Use a hose to rinse the pump basin and the inlet screen, making sure both are clean and unobstructed. A small amount of bleach or disinfecting vinegar can also be used to clean stubborn caked-on dirt and grime. The discharge pipe should be flushed periodically to make sure no larger rocks or twigs are caught in it, which can prevent proper drainage.